Ingco Flux-Cored Welding Wire 15kg FW120151 E71T-1C 1.2mm

Our review

This is a 15kg roll of flux-cored welding wire from Ingco, listed as AWS E71T-1C with a 1.2mm diameter and intended for carbon steel. The E71T-1C classification tells you it is a gas-shielded, all-position wire, so it suits fabrication and repair work on mild steel where you want good penetration and a clean bead without switching to solid wire and a separate gas setup for every job. It is a sensible pick for a workshop that already runs a compatible MIG or flux-cored machine and goes through wire steadily, since a 15kg spool cuts down on changeovers compared with small rolls. Before buying, confirm your welder accepts 1.2mm flux-cored wire and that its polarity and duty cycle match this type, because running the wrong polarity is a common cause of porosity and poor arc stability. Also check the spool size and hub fit against your machine's spindle. Compared with smaller 1kg or 5kg rolls, this is better value per kilo for regular use but less convenient if you only weld occasionally or want to try a different wire. Compared with self-shielded E71T-GS wire, this E71T-1C grade generally needs an external shielding gas, so factor that into your setup. Available on Sokonia.