Ingco Tile Cutter HTC04600, 600mm Cutting Length, 12mm Thickness

Our review

The Ingco HTC04600 is a manual tile cutter built around a 600mm maximum cutting length and a 12mm maximum cutting thickness, so it suits wall and floor tiles in the sizes commonly fitted in homes and small commercial jobs. The steel base measures 815x195cm with a 2mm base thickness, and the sliding bar runs at a 19mm diameter, which is the part your scoring wheel travels along. Two tungsten carbide blades are included, each 16x6x3mm, and the tool supports both straight line and diagonal line cutting, which matters when you are working around doorways, corners or drain outlets. Before buying, measure your longest planned cut against the 600mm limit and confirm your tile thickness stays under 12mm, since manual cutters are sized by these two figures rather than by motor power. Compare alternatives on blade type and replacement availability, base rigidity, and whether the breaker foot gives you clean snaps on porcelain versus softer ceramic. If you mostly cut large-format or very hard porcelain, a rail cutter with a longer bed or a wet saw may serve you better; for regular straight and diagonal cuts on standard tiles, this class of cutter is the practical choice. Check that the blade size is one you can reorder locally, because worn scoring wheels are the usual reason a manual cutter starts leaving ragged edges.