Ingco JBT11C Jigsaw Blade for Wood, 74mm, 8TPI, Pack of 5

Our review

This is a five-piece set of Ingco JBT11C jigsaw blades intended for cutting wood. Each blade measures 74mm along the tooth edge and carries 8 teeth per inch, with the teeth milled into high carbon steel. That combination points to a blade built for straightforward woodwork rather than for metal, tile or masonry, so it suits a carpenter, fitter or home user whose jigsaw work is mostly timber. The 8TPI pitch is a middle ground: coarse enough to clear sawdust reasonably well in softwood, fine enough to leave a fairly tidy edge in thinner boards and plywood. Before buying, check your jigsaw's blade fitting, since jigsaws accept different shank types and this listing does not state which one applies here. Also confirm the material you plan to cut is wood, and think about board thickness, because a 74mm blade has limits on how deep it can reach. Compare against blades with a higher tooth count if you need cleaner cuts in veneered or laminated sheet, or a lower count if you want faster ripping in thick softwood. A five-pack makes sense if you cut regularly and would rather swap a dull blade than stop work.