Ingco A30RBF Flat Metal Cutting Disc 405mm x 3.0mm x 25.4mm
TSh 14,000
Our review
This Ingco disc is a flat-centre abrasive wheel made for cutting metal, sized 405mm across, 3.0mm thick, with a 25.4mm bore. That bore and diameter match the Ingco COS4051-5P cut-off saw, so it is the natural consumable if you already run that machine or another saw with the same spindle. It suits workshop and fabrication work where you need straight cuts through metal rather than grinding or finishing. Before buying, confirm your machine accepts a 405mm disc with a 25.4mm arbor, and check the maximum RPM your saw runs at against the disc's rating, which is not stated here. Compare thickness too: 3.0mm is a standard cut-off size, while thinner discs cut faster but wear sooner. If you need a wheel for a different arbor size or a smaller angle grinder, this one will not fit. Available on Sokonia.
Sold and delivered by Sokonia. We may earn a commission when you buy through this link.