Ingco ASG4041 Spray Gun, 400cc with 1.5mm Nozzle
TSh 64,000
Our review
The Ingco ASG4041 is a suction-feed spray gun with a 400cc paint cup and a standard 1.5mm nozzle, producing a pattern roughly 180 to 250mm wide. Ingco lists it as suitable for base coat, so it fits someone spraying primer or colour coats on panels, furniture or similar projects where a moderate, even fan is wanted rather than a fine finishing mist. The kit includes Europe, USA, Nitto and Italy type connectors, which matters if your compressor hose already uses one of those fittings. Before buying, check your compressor can sustain the air volume a gun like this needs, and confirm the 1.5mm nozzle suits your paint: thicker materials often call for a larger nozzle, while thin lacquers may want smaller. Compare against gravity-feed guns, which can run at lower pressure and waste less paint, and against models with adjustable fluid and air controls if you want finer tuning. Cup size, nozzle diameter and connector type are the details worth lining up with your setup first.
Sold and delivered by Sokonia. We may earn a commission when you buy through this link.