Ingco SDS Plus Hammer Drill Bit 12x160mm DBH1211201

Our review

This is a single SDS Plus drill bit from Ingco, sized 12mm in diameter and 160mm in overall length, listed under model DBH1211201 and supplied on a plastic hanger. The SDS Plus shank means it is intended for rotary hammer drills that take that fitting rather than a plain round shank, so it is worth confirming your tool's chuck system before ordering. A 12mm bit at this length is a common working size for anchoring and fixing tasks in masonry, where you need a hole deep enough for a plug or anchor without drilling excessively far. Because the listing gives no information on tip geometry, flute design or the material it is rated for, treat those as unknowns and check the packaging or the manufacturer's own data if you need a bit for hard concrete rather than general masonry. When comparing, look at other SDS Plus bits in the same 12x160mm size and consider whether you want a single bit or a set, since buying one size at a time only makes sense if you already own the others you use. Also check the shank type carefully, as SDS Plus and SDS Max are not interchangeable. It is available on Sokonia.